The Promag MF7 is a very high performance MIFARE™ reader. This well-designed reader is packed with technical features that have medium range capability and a small footprint. The MF7 reader is the best choice for system integrators because of its wide range of power inputs (between 5V to 18V DC). Even at 5 Volts (DC), the MF7 features a good reading range. The MF7 reader also comes with a variety of Three-In-One interface, RS-232, MSR ABA TK2 and Wiegand interfaces allowing it to integrate with a variety of applications, especially security access control.
- Reading distance: up to 50mm
- Frequency: 13.56 MHz
- Read MIFARE™ UltraLight® and MF1 Standard cards
- Three -In -One interface, with Wiegand, MSR ABA TK2 and RS232 interfaces
- Fast data transfer
- Weather resistant
- High data integrity
- User convenience
- Easy to install
- Available installed on metal surface
- Power Requirements:5~18 Volts regulated DC at 200 mA typical. A linear regulator is recommended.
- MSR ABA Track2
- Or special customized specifications.
- Interface Cable: 90 cm
- Read MIFARE™ standard cards for 1024/4096 byte and MIFARE™ UltraLight cards of EEPROM size 512bit for ISO 14443A
- Typical Maximum reading distance:Up to 50mm at 5~12V with MIFARE™ card In ideal conditions.
- Operating frequency: 13.56MHz standard
- Read Only for Unique Serial Number / Unique Identifier ISO/IEC 14443 Type A
- External control Audio / Visual Indication: Internal LED and Buzzer
- Dimensions: 83 (L) x 47 (W)x 16(H) mm
- Housing material: ABS
- Operating temperature Range: -10 to 60 Deg C.
- Operating relative Humidity: 10 ~ 90%.
Note: The Specification is subject to change without notice.
- Access control
- Security system
- ID card for admission control
- Personal Identification
MIFARE is a registered trademark of NXP B.V.
Manufacturer Part Number
For further information about this product please call 01242 588599 or email email@example.com
Buy on-line now at identity2u.net